10% Off Ends in 7 hours, 6 minutes

1 1/2" Thick Solid Wood Custom Table Top - 7' to 10'

Total:
$773.96 $859.95
USA Flag Made in USA Shipping Truck Questions? Guarantee Badge Questions? Questions? Shipping Truck This item ships Ground

Our unique custom tops are perfect to upgrade your dining table, bar top, counters, vanities, and more. Each top is built from sustainably sourced lumber boards that are hand selected to meet your specific dimensions. Tree growth is affected by many different variables, which leads to different grain patterns, color variation, and figure in each board. We take care to select boards with similar characteristics but no two boards are the same, and this natural variation gives each custom piece its own unique appearance. As a natural element, wood will gradually show signs of aging as it reacts to its environment, leading to beautiful changes over time. 

Choose Your Wood Type

Select from true, solid Black Walnut, Maple, or White Oak wood.*Each species will have natural color variations. Black Walnut Tables may or may not contain Sapwood, depending on available boards.

Choose Your Dimensions Select your Width and Length from each drop down menu. If these aren't the perfect options, use the Additional Width & Length Options drop downs to get the size just right. We will use our Solid Wood Lumber Boards to build the top to your exact dimensions. Looking for a thicker top or a longer length? Check out our other Custom Table Top Options
Choose Finish Level

Really make this table yours by taking it through the final finishing steps! Select our DIY/Unfinished option to receive a top built to your specific dimensions, flattened on both sides, and ready for sanding. Select our Fully Finished option to receive a top that’s ready to use! All Fully Finished tops have been built to dimension, flattened on both sides, finish sanded to a 220 grit on the top side, all large voids/cracks filled with epoxy, and sealed with our Satin Lacquer or Rubio Monocoat Oil Finish.
*Finish is selected by the shop based on characteristics of the wood used to craft the table(s).
*When Rubio Monocoat Oil Plus 2C is selected as the finish, the bottom/back side of the piece will be sealed with Satin Lacquer and the Top/Sides will have the Rubio applied. Rubio can be applied to both sides upon request at an additional cost.

Choose Preferred Edge

Get a soft, natural look with our Sculpted Live Edge or a sleek, modern look with a Straight Edge. Sculpted Live Edge Table Tops can have a width variance of 2-4" below your selected width.

Choose Sanding Finish

Our Grinder Sanded Finish adds a Rustic Texture to the surface of the table while being smooth enough to not risk catching splinters when using. Our Smooth Sanded Finish is a traditional finish that gets you a 100% smooth top.

Additional Customization Available

You can edit the table to any size or shape, and request additional services such a drilling cord holes, preparing end to end joints and more. Additional services are quoted on an order-by-order basis. Please add any additional work you would like quoted to your order notes and our team will be in touch.

Need legs to match?

Check out our Solid Wood Base & Leg options.

 

Ready to ship in 2-3 weeks and Ships Free to the Lower 48 States

USA Made in Webster City, IA. Shipped to your home or business anywhere in the United States and Canada.

Orders are immediately processed upon receipt and cannot be cancelled or refunded once processing has commenced. However, minor adjustments in size and/or finishing details may be possible depending on the initial order size and the stage of processing it is currently at.

*Final Table Top Thickness will range from 1 1/2" - 1 3/4".

*Pictures show examples of the product our custom tops and are not the exact top you will receive. Color, Character, Grain Pattern, and Natural Characteristics will vary between each piece. These characteristics are not considered defects and will not result in a refund or replacement of the product.

*Finished pieces may need refinishing over time due to wear and tear from normal use. If the piece is used outside and/or exposed to the elements, such as large temperature/humidity changes, moisture, direct sun, etc., it may need refinishing more often. 

** All custom orders are processed promptly, typically on the same or following business day to ensure quick turnaround times. Once processing has been started, orders are not eligible for cancellation or refund.

**You can request to see the selected boards prior to the start of the table build. There will be a $75 service fee applied, which covers minor adjustments. Any major adjustments are up to discretion of the shop and may incur additional service fees.

**Any requests/changes to the order after it has been placed may result in longer lead times. 

Shipping Information

How to Qualify for Free Shipping

Our free shipping promotion covers economy shipping to the lower 48 U.S. states on orders over $195 before discount. For a limited time only, this includes both commercial & residential freight shipments.

Order Changes

Once your order is placed, we cannot guarantee that it can be modified or cancelled. We process orders quickly and your order may be too far along to be changed or cancelled. Please reach out to us as soon as you are aware of a change that needs made.

If a shipping address needs changed after the carrier has taken possession of the package, carriers will charge a reconsignment fee. This fee is not covered by shipping costs paid or our Free Shipping Promotion and must be handled prior to the reconsignment being approved. If we receive a reconsignment request from the carrier, we will reach out to verify and collect the amount due. If you need to update your shipping address, please reach out to us as soon as possible. This will help avoid reconsignment fees, redelivery fees, and misdelivered items. 

Ground Shipping

Small items will be shipped via Ground Services such as UPS Ground, USPS, and Speedee Delivery. All ground orders, with no custom work, will generally ship the business day after it was placed. Orders placed over the weekend, or during peak times, may take 1-2 days to be shipped depending on order volume. You will receive a shipping email as soon as your package label is printed.

Typical ground shipping times range from 3-7 business days with UPS and USPS, depending on your distance from our facility in Central Iowa. Speedee Delivery services areas here in the Midwest and their transit times are typically 1-3 business days.

Please note: due to additional handling large or oversized packages may take 1-2 days longer for delivery than smaller sized packages.

Freight Shipping

Due to the size and weight of our products, some orders are shipped via LTL or Commercial Freight. Freight shipments can be delivered to a commercial address, held at a local freight terminal, or delivered to a residential address. We use several different freight carriers and will notify you by email of who we shipped the order with and the tracking number once your package has been loaded on a truck at our facility. This email will also contain information about what to expect at the time of delivery. We highly recommend reading over this information so you are prepared to accept your shipment as once your package is loaded on the truck, ownership has been transferred onto you.

Shipments to a commercial address will be delivered Monday - Friday during normal business hours. If your company has differing or odd hours, please note this when placing your order. If your package will be held at the terminal, the carrier will call you as soon as it is available for pickup. For Residential deliveries, the carrier will call once your package has arrived to the terminal to schedule a delivery appointment. Residential shipments under 8' long and 48" wide will be shipped with Liftgate Service to help with unloading the shipment. If your shipment is over these dimensions, the driver will be unable to use the liftgate and you will need to prepare a way to unload the shipment upon arrival. Residential deliveries are delayed by a day or two because of appointment scheduling. Residential deliveries should be scheduled in a timely manner to minimize handling by the freight carrier and to get the shipment from an uncontrolled environment to your home. To receive your package quicker, we recommend choosing the terminal pickup or commercial option.

Upon receipt of your freight shipment, you should open and unpack the items immediately to allow proper airflow. Leaving the order wrapped on the pallet or in the crate will encourage the wood to move and can lead to cracks, checks, warping. etc. 

If you notice any changes in the shipment or damage to the shipment please be sure to note it on the BOL or Freight Bill prior to signing it (i.e. hole in side, crushed corner, etc.). If the driver does not permit you to note the damage, ask them to make the damage notes prior to signing it. If they state they will NOT note the damages there is obvious external damage, call us immediately at (515) 832-8733.

If you do not inspect before signing, and do not note any changes or damages on the BOL or Freight Bill, you are, for all practical purposes, waiving the right to collect on a damage claim, even if the damage is discovered later (known as concealed damage). If you suspect there is concealed damage, open the container before signing the BOL and inspect the contents. The driver must stay until the BOL is signed, so do not be intimidated or rushed by them. If you are unable to inspect the contents at that time, please note “Subject to Inspection” on the BOL.

Canadian Shipments

Orders shipped to Canada will incur additional duties, taxes, and other fees. These additional fees associated with shipping are the customer's responsibility and are not included in shipping fees charged. The carrier will reach out to you directly with any fees due once the package has been processed through customs. We require a broker for all Canada shipments. If you do not have one, we will assign one through the shipping carrier. 

International Shipping

We can ship worldwide; however, the buyer is responsible for verifying that our product can be shipped into their country and are fully responsible for all broker duties and taxes. For international shipments, we recommend setting up an account with www.myus.com, or a similar shipping service. They are a facility where you can have items shipped in from all over the US and then have them all shipped out to you together. The company will provide you with a US address to ship to, allowing you to take advantage of many Free Shipping promotions! Their rates are based on total weight and they are able to offer much better rates through the Post Office, Fedex , UPS and other carriers.

Local Pickup

We are not a retail store front, but if you are in the area we do offer a local pickup option. We ask that you complete your order online and contact us to schedule an appointment for pickup. Pickups must be scheduled Monday – Friday from 8AM-3PM. Weekend pickups are not available.

Other Fees

Chargeback claims may incur a $25 fee. Storage fees may be accessed if shipments are not picked up from freight terminals within 7 days, or if products are held at our warehouse for final payment before shipping. Please keep in contact with us to avoid these charges.

Damaged Items

Damage must be reported within 3 business days. Although we package our products diligently to ensure that they come to you in the condition they left our site, we can't always guarantee that they are handled with the care that they require once they leave our shop. In the event that you receive your item(s) and it is damaged, please email us immediately so we can immediately address it with the carrier. Please be sure to provide as much information as you can regarding the package appearance, what was damaged, and be sure to include pictures of the damage.*

If you have a replacement item in mind, please be sure to let us know and we will see what we can do to get that shipped out to you right away.

*With UPS, once we file a claim, they require the original packaging and the item to be held at your residence for up to five business days. Please keep the packaging and item available, and be ready to package it back up for your UPS driver to pick up, should they request an inspection.

Received Incorrect Item

If your order arrives and it is not right, please email us! Provide as much of a description as you can of what was received versus what you should have been received. If you can include pictures of the item you got, this will help us greatly while investigating the problem!

Common Questions

Q: Where does your wood come from?

All of our wood is local to Iowa; some comes from urban removals where they were taken down for new construction, some from storm damage or any other reason a homeowner might not want that tree in their yard, and others come from sustainable timber management. Most of the wood would have been shredded into free city mulch, but the logs were saved and milled, and are now ready to be used to make something great!

Q: Has the wood been kiln dried?

Yes. Everything we use has been kiln dried to 6-8% moisture content. We take a lot of pride in drying our slabs to the proper moisture level, and at the right speed to avoid any future issues with the piece.

Q: Can I see the boards before you build the table?

Yes, it is possible to view the boards before the table is constructed. However, it is important to note that this request must be made at the time of placing the order and will result in a $75 service fee. Additionally, incorporating this step will extend the processing time of the order, therefore, we kindly ask for a prompt response from you to ensure the order progresses smoothly. It is important to note that once the boards have been chosen, this is the start of work on your order, and it will not be eligible for cancellation or refund. Minor changes to board selection may be accommodated. Any major changes are at the discretion of the shop and may result in additional service fees.

Q: Can I choose the boards used to build my table?

Due to the volume of wood available to choose from for each build, it is not possible to select the individual boards for your table. Our team uses extreme attention to detail when putting each table together and finds the best color/figure matches possible! If there are any concerns you have, such as large knots, sapwood, etc. we would be happy to pass this information along for you! 

Q: My table needs cord holes, can you add them?

We can! This service is quoted on a job-by-job basis depending on the size, number, and location of the holes needed. Send us an email with the information above and even a quick drawing if you have one, and our team will get back to you quickly!

Q: Can I choose a color for my epoxy?

We offer several epoxy color choices and would be happy to send you an image of what is available! Custom colors are also an option at an additional cost.

Q: Your listings say “rustic”, what does that mean?

Rustic is used to describe the grade of the wood we use for our custom builds. This means the wood contains natural characteristics such as inclusions, voids, knots, pith, cracks, and splits. These all add to the natural charm of the wood and any areas needing leveled are filled with epoxy, when the Fully Finished option is selected. If you'd like a piece without these characteristics, we may be able to build your table top using select wood. Send us a message and we will check the availability of select wood and get you an updated quote! 

Q: Can I change/cancel my order?

All custom orders are processed promptly, typically on the same or following business day to ensure quick turnaround times. Due to the nature of made-to-order custom items, once processing has commenced, orders cannot be cancelled or refunded. However, minor changes may be possible depending on the stage of processing the order is in when the changes are requested. Additional service fees may be applicable for certain changes.

The Lumber Shack Reviews

Gold Star

5.0

(326)
5 Gold Star Review

"Hands down, the most incredible overall experience! We got exactly what we wanted/needed for an amazing price!! If we ever need another piece of lumber, I know where I'm going. Thanks, Lumber Shack!!"

5 Gold Star Review

“Hands down the best source for specialty lumber! Always get exactly what I order, measurements and details are always accurate! Quality service and stable, well packaged materials with prompt shipping. My go to!”

5 Gold Star Review

"Amazing product and customer service! I like to woodwork and build furniture myself, and I’m so excited to have found this place for reliable high quality hardwood!"

See More Reviews →